CM-SX3-EM: CODEMAXX- Waterproof Touch Access Controller-Doorbell-Card Reader
This device is a Single door multifuntion standalone Access Controller or a wiegand output reader. It uses Atmel MCU assuring stable performance. The operation is very user-friendly, and low-power circuit makes it long service life.
The device supports 1,000 users (988 common users + 2 panic users + 10 vistor users), all user data can be transferred from one to another. It supports multi access modes in card access, PIN access, card + pin access, or multi cards/PIN access. It has extra features including block enrollment, interlock, wiegand input & output interface......etc.
APP OPERATION--------
Waterproof Touch Fingerkey & Reader
>Capacitive Fingerprint Sensor,touch key
>Metal case, anti-vandal
>Waterproof, conforms to IP66
>Wiegand 26~44bits,56bits,58 bits input & output
>Can be used as Wiegand reader with LED & buzzer output
>User data can be transferred (except fingerprint users)
>Integrated alarm & Buzzer output
>Built-in light dependent resistor(LDR) for anti tamper
>Backlit keypad,can set automatic OFF after 20 seconds
>2 devices can be interlocked for 2 doors
User Capacity Common User | 1000 988 (100 Fingerprint Users + 888 PIN/Card Users) 10 |
PIN Length | 4~6 digits |
Operating Voltage Idle Current | 12~18V DC ≤ 60mA |
Proximity Card Reader Radio Technlogy Read Range | EM 125KHz 2~6cm |
Wiring Connections | Relay output, exit button, alarm, door contact, Wiegand input/output |
Relay Adjustable Relay Output Time Lock Output Load | One (NO, NC, Common) 0~99 Seconds (5 seconds default) 2 Amp Maximum |
Wiegand Interface PIN Output | EM card version: Wiegand 26~44 bits input & output (Factory default: Wiegand 26bits)
4 bits,8bits (ASCII),10 digits Virtual Number(Factory default:4bits) |
Environment Operating Temperature Operating Humidity | Meets IP66 -30°C ~ 60°C (-22°F ~ 140°F) 0%RH ~ 98%RH |
Physical Color Dimensions Unit Weight Shipping Weight | ABS Black L150 x W45 x H22 (mm) 190g 280g |